GE Iron Grip 100% silicone adhesive 10.1 fl. oz. cartridge | GE Iron Grip 100% Silicone Adhesive

GE Iron Grip 100% silicone adhesive 10.1 fl. oz. cartridge

GE Iron Grip* adhesive is available in 10.1fl. oz. cartridges that are ideal for bigger projects. It can be easily loaded into and applied with standard caulk guns.

Download the technical data sheet for installation instructions, precautions and other information.

Find a store
Product Attributes

Speed, durability and versatility are all important attributes to consider when purchasing an adhesive. This silicone adhesive can deliver on all of them.

Fast Adhesion

Fast, primerless adhesion to many substrates and finishes, including most aluminum, steel, PVC, fiberglass, polystyrene, glass, concrete, plywood, drywall, ceramic, porcelain, stone, granite, laminate, polycomposite, treated and untreated wood, MDF and masonry.

30-Minute Water-Ready†

The adhesive can be exposed to water in as little as 30 minutes without washing away.

Waterproof, Flexible, Shrink-/Crack-Proof

Once cured, the adhesive will remain flexible and will not shrink, crack, break down or wash away even when exposed to harsh weather such as extreme heat or freezing temperatures.

Stable Consistency (uncured state)

Supplied as a lightweight paste offering relatively unchanged consistency over a wide temperature range, it can be easily gunned and tooled under hot and cold conditions.

Thermal Stability (cured state)

Once cured, the material properties remain fully elastic over a range of -50°F to 300°F (-45.5°C to 148.8°C).

Low Sag or Slump

Useful for application to horizontal, vertical or overhead surfaces.


Iron Grip adhesive meets or exceeds the requirements of the following specifications:

American Society for Testing & Materials International (ASTM)
  • ASTM C920: Standard Specification for Elastomeric Joint Sealants; Type S, Grade NS, Class 25, Use NT, M, G, A & O
  • ASTM C557: Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
  • ASTM D3498: Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
UL Environment
  • UL 2818 – GREENGUARD Certification Program for Chemical Emissions for Building Materials, Finishes and Furnishings
American Architectural Manufacturers Association (AAMA)
  • AAMA: 802.3 Back Bedding Glazing Compound, Type 1, 805.2 Back Bedding Glazing Compound, Group C, 808.3 Exterior Perimeter Sealing Compound
APA (American Plywood Association)
  • APA AFG-01 Test C Dry Lumber
U.S. Federal Specifications (cancelled Sept. 1996)
  • TT-S-001543A Sealing Compound: Silicone Rubber Base (for Caulking, Sealing & Glazing in Buildings and Other Structures)
  • TT-S-00230C Sealing Compound: Elastomeric Type, Single Component (for Caulking, Sealing & Glazing in Buildings and Other Structures)
Canadian General Standards Board (inactive)
  • CGSB-19.13-M87 Sealing Compound, One-Component, Elastomeric, Chemical Curing
  • Iron Grip adhesive meets CA CARB VOC requirements